Home > Canon Powershot > Canon S3 Is Lcd Not Working

Canon S3 Is Lcd Not Working


I think you get four different screens one at a time each you press. I tried a bunch of things but it finally came unstuck when I turned the flash off, set the shutter speed at about .5", set it to highspeed picture taking, held Next look down the lens and take a picture. I dunno....any ideas? have a peek at this web-site

After some attempts I held the camera in front of the air con heater outlet for a while then had success after a few more tries. Let me find a page in the manual to get started. I have a S3 IS that had a stuck shutter on Christmas of all days and couldn't get it to work. Gently tap on the lens housing with a pencil or pen in between tries.

Canon Powershot S3 Is Black Screen Problem Fix

Hello,I had the same problem. I'll try this. Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion Please use common sense and care if you decide to try this technique, as there is some obvious potential for further damaging your camera with this step.

Thanks to your post I found out I had a stuck shutter on my Canon S2IS camera. I had previously had the same problem (didn't know it) and 'fixed' it by just power cycling the camera. You can see the LCD or EVF for menus? My Digital Camera Screen Is Black I've look close to the lens and it's a stuck shutter - CLOSED.

But no one mentioned if they can actually take pictures even with the blank screen or no. i thought i have to get a new camera but saw this, tried it and it really worked!!! I've tried this metod for more than 20 times and also step 5a. http://www.justanswer.com/video-camera-repair/7vum2-lcd-monitor-canon-powershot-s3-is-will-not-work-when.html Mayor: An expert whose answer got voted for 2 times.

He loves the Canon PowerShot S3 IS. Canon Powershot S2 Is Shutter Stuck I was about to spend money to get a Panasonic TZ5. First couple of pics were ugly but things seem to be working now. Located on the bottom just to the right of the view screen.

Canon Powershot S3 Is Troubleshooting

Do you know if a similar arrangement exists here, or should i maybe e-mail the US contact in the first instance? Facebook Twitter Google+ YouTube LinkedIn Tumblr Pinterest Newsletters RSS skip to main | skip to sidebar Do It Yourself Digital Camera Repair This Blog is dedicated to the home repair of Canon Powershot S3 Is Black Screen Problem Fix It worked after the first try.Thanks December 25, 2009 at 7:21 PM Anonymous said... Canon Powershot S2 Is No Image In Viewfinder I did not upload it onto a computer, though; but I know it was black, as I skip through various photos that were stored in the memory card.It is obvious that

Sticky shutter is working again on my A610. Check This Out and finally, i decided to try 5a step and nothing happened. August 7, 2009 at 6:48 PM Discouraged said... I have a Canon SD750 and after a 5 few tries of the mentioned fix, I too got frustrated and did what one of the readers did and hit it against Canon Pc 1130 Black Screen

January 3, 2010 at 8:53 PM Camera Repair said... Mayor: An expert whose answer got voted for 2 times. I might just have to suck it up and buy a new one. Source Will not take pictures.

If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. Canon Camera Taking Black Pictures Browse Categories Answer Questions Canon PowerShot S3 IS Digital Camera Canon PowerShot Digital Camera Canon Digital Camera Digital Cameras All Unanswered Join Sign In Ask a Question × HomeForumDigital CamerasCanonPowerShotPowerShot S3 worked for my Canon S2 IS.

When I playback the shot that I just made, it was 'black' like you had.

Otherwise the camera works fine. Thanks for your site. January 4, 2010 at 3:10 AM Lorrie said... Canon Powershot S3is Manual Reply Reply with quote Complain finephoto • Regular Member • Posts: 101 SOLUTION: Optical assembly.

LOL. June 11, 2009 at 8:26 PM Anonymous said... If 5a scares you, others have reported success with an alternate method of merely extending the lens and then gently tapping around the extended lens barrel with a pen or pencil. have a peek here Canon S3 IS Review: Full Review - Operation www.imaging-resource.com/PRODS/S3IS/S3ISA3.HTM Record Mode LCD Display: In Record mode, the PowerShot S3 IS's LCD reports ...Unlike its behavior in Record mode, the Display button

Is there any detailed info at all regarding the loose wire on the sensor going to the circuit board? I don't endorse the fix (obviously), but they describe how to tell if you have a stuck shutter. After about a week, my camera works well again. I just got the camera back, I decided to try the fix and it worked on the third try.

It took 15+ tries before finally freeing. The repair sheet says "the optical assembly did not operate propoerly causing no image output... I have an old Canon Ixus II that my son now uses. Step 6b: Again, in a very dark room, place the camera in shooting mode and then open and close the battery cover.

They pre-paid shipped my Powershot to Chicago repair. Thanks! Now she is back in business taking pictures! descongelador 8,824 views 1:36 Canon Lens Stuck Frozen Solved by The Chime Man! - Duration: 1:40.

this time the screen went black but thanks to your amazign advice i got my camera to work again after only 2 tries. I tried solution steps 1-5 about 7-8 times (starting losing track) and the LCD starting displaying again. You all can do that for free.CR January 2, 2010 at 9:21 PM Maverick said... However, I can view my existing photos in Display mode.

You just saved me €150.